PEXT (Intel x86/64 assembly instruction)

모두의 코드
PEXT (Intel x86/64 assembly instruction)

작성일 : 2020-09-01 이 글은 921 번 읽혔습니다.

PEXT

Parallel Bits Extract

참고 사항

아래 표를 해석하는 방법은 x86-64 명령어 레퍼런스 읽는 법 글을 참조하시기 바랍니다.

Opcode/ Instruction	Op/ En	64/32 -bit Mode	CPUID Feature Flag	Description
`VEX.NDS.LZ.F3.0F38.W0 F5 /r` PEXT r32a r32b r/m32	RVM	V/V	BMI2	Parallel extract of bits from r32b using mask in r/m32, result is writ-ten to r32a.
`VEX.NDS.LZ.F3.0F38.W1 F5 /r` PEXT r64a r64b r/m64	RVM	V/N.E.	BMI2	Parallel extract of bits from r64b using mask in r/m64, result is writ-ten to r64a.

Instruction Operand Encoding

Op/En	Operand 1	Operand 2	Operand 3	Operand 4
RVM	ModRM:reg (w)	VEX.vvvv (r)	ModRM:r/m (r)	NA

Description

PEXT uses a mask in the second source operand (the third operand) to transfer either contiguous or non-contig-uous bits in the first source operand (the second operand) to contiguous low order bit positions in the destination (the first operand). For each bit set in the MASK, PEXT extracts the corresponding bits from the first source operand and writes them into contiguous lower bits of destination operand. The remaining upper bits of destination are zeroed.

This instruction is not supported in real mode and virtual-8086 mode. The operand size is always 32 bits if not in 64-bit mode. In 64-bit mode operand size 64 requires VEX.W1. VEX.W1 is ignored in non-64-bit modes. An attempt to execute this instruction with VEX.L not equal to 0 will cause #UD.

Figure 4-9. PEXT Example

Operation

TEMP <- SRC1;
MASK <- SRC2;
DEST <- 0 ;
m<- 0, k<- 0;
DOWHILE m< OperandSize
          IF MASK[ m] = 1 THEN
                DEST[ k] <- TEMP[ m];
               k <- k+ 1;
          FI
m <- m+ 1;
OD

Flags Affected

None.

Intel C/C++ Compiler Intrinsic Equivalent

PEXT : unsigned __int32 _pext_u32(unsigned __int32 src, unsigned __int32 mask);
PEXT : unsigned __int64 _pext_u64(unsigned __int64 src, unsigned __int32 mask);

SIMD Floating-Point Exceptions

None

Other Exceptions

See Section 2.5.1, "Exception Conditions for VEX-Encoded GPR Instructions", Table 2-29; additionally

#UD If VEX.W = 1.

첫 댓글을 달아주세요!

강좌에 관련 없이 궁금한 내용은 여기를 사용해주세요

또는 직접 입력하세요 (댓글 수정시 비밀번호가 필요합니다)

댓글을 불러오는 중입니다..

모두의 코드 PEXT (Intel x86/64 assembly instruction)