모두의 코드
LZCNT (Intel x86/64 assembly instruction)

작성일 : 2020-09-01 이 글은 32 번 읽혔습니다.

LZCNT

Count the Number of Leading Zero Bits

참고 사항

아래 표를 해석하는 방법은 x86-64 명령어 레퍼런스 읽는 법 글을 참조하시기 바랍니다.

Opcode/InstructionOp/
En
64/32
-bit
Mode
CPUID
Feature
Flag
Description
F3 0F BD /r
RMV/VLZCNTCount the number of leading zero bits in r/m16, return result in r16.

LZCNT r16 r/m16
F3 0F BD /r
RMV/VLZCNTCount the number of leading zero bits in r/m32, return result in r32.

LZCNT r32 r/m32
F3 REX.W 0F BD /r
RMV/N.E.LZCNTCount the number of leading zero bits in r/m64, return result in r64.

LZCNT r64 r/m64

Instruction Operand Encoding

Op/EnOperand 1Operand 2Operand 3Operand 4
RMModRM:reg (w)ModRM:r/m (r)NANA

Description

Counts the number of leading most significant zero bits in a source operand (second operand) returning the result into a destination (first operand).

LZCNT differs from BSR. For example, LZCNT will produce the operand size when the input operand is zero. It should be noted that on processors that do not support LZCNT, the instruction byte encoding is executed as BSR.

In 64-bit mode 64-bit operand size requires REX.W=1.

Operation

temp <- OperandSize - 1
DEST <- 0
WHILE (temp >= 0) AND (Bit(SRC, temp) = 0)
DO
    temp <- temp - 1
    DEST <- DEST+ 1
OD
IF DEST = OperandSize
    CF <- 1
ELSE
    CF <- 0
FI
IF DEST = 0
    ZF <- 1
ELSE
    ZF <- 0
FI

Flags Affected

ZF flag is set to 1 in case of zero output (most significant bit of the source is set), and to 0 otherwise, CF flag is set to 1 if input was zero and cleared otherwise. OF, SF, PF and AF flags are undefined.

Intel C/C++ Compiler Intrinsic Equivalent

LZCNT : unsigned __int32 _lzcnt_u32(unsigned __int32 src);
LZCNT : unsigned __int64 _lzcnt_u64(unsigned __int64 src);

Protected Mode Exceptions

#GP(0)

  • For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments.

  • If the DS, ES, FS, or GS register is used to access memory and it contains a null segment selector.

#SS(0)

  • For an illegal address in the SS segment.

#PF

  • (fault-code) For a page fault.

#AC(0)

  • If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3.

Real-Address Mode Exceptions

#GP(0)

  • If any part of the operand lies outside of the effective address space from 0 to 0FFFFH.

#SS(0)

  • For an illegal address in the SS segment.

Virtual 8086 Mode Exceptions

#GP(0) If any part of the operand lies outside of the effective address space from 0 to 0FFFFH.

#SS(0) For an illegal address in the SS segment.

#PF (fault-code) For a page fault.

#AC(0) If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3.

Compatibility Mode Exceptions

Same exceptions as in Protected Mode.

64-Bit Mode Exceptions

#GP(0)

  • If the memory address is in a non-canonical form.

#SS(0)

  • If a memory address referencing the SS segment is in a non-canonical form.

#PF

  • (fault-code) For a page fault.

#AC(0)

  • If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3.

첫 댓글을 달아주세요!
프로필 사진 없음
강좌에 관련 없이 궁금한 내용은 여기를 사용해주세요