SARX, SHLX, SHRX

Shift Without Affecting Flags

참고 사항

Instruction Operand Encoding

Description

Shifts the bits of the first source operand (the second operand) to the left or right by a COUNT value specified in the second source operand (the third operand). The result is written to the destination operand (the first operand).

The shift arithmetic right (SARX) and shift logical right (SHRX) instructions shift the bits of the destination operand to the right (toward less significant bit locations), SARX keeps and propagates the most significant bit (sign bit) while shifting.

The logical shift left (SHLX) shifts the bits of the destination operand to the left (toward more significant bit loca-tions).

This instruction is not supported in real mode and virtual-8086 mode. The operand size is always 32 bits if not in 64-bit mode. In 64-bit mode operand size 64 requires VEX.W1. VEX.W1 is ignored in non-64-bit modes. An attempt to execute this instruction with VEX.L not equal to 0 will cause #UD.

If the value specified in the first source operand exceeds OperandSize -1, the COUNT value is masked.

SARX,SHRX, and SHLX instructions do not update flags.

Operation

TEMP <- SRC1;
IF VEX.W1 and CS.L = 1
THEN
    countMASK <-3FH;
ELSE
    countMASK <-1FH;
FI
COUNT <- (SRC2 AND countMASK)
DEST[OperandSize -1] = TEMP[OperandSize -1];
DO WHILE (COUNT ->  0)
    IF instruction is SHLX
          THEN
                DEST[] <- DEST *2;
ELSE IF instruction is SHRX
                THEN
                      DEST[] <- DEST /2; //unsigned divide
          ELSE // SARX
                      DEST[] <- DEST /2; // signed divide, round toward negative infinity
    FI;
    COUNT <- COUNT - 1;
OD

Flags Affected

None.

Intel C/C++ Compiler Intrinsic Equivalent

Auto - generated from high - level language.

SIMD Floating-Point Exceptions

None

Other Exceptions

See Section 2.5.1, "Exception Conditions for VEX-Encoded GPR Instructions", Table 2-29; additionally

#UD If VEX.W = 1.

첫 댓글을 달아주세요!

강좌에 관련 없이 궁금한 내용은 여기를 사용해주세요

다음으로 로그인

또는 직접 입력하세요 (댓글 수정시 비밀번호가 필요합니다)

댓글 달기

댓글을 불러오는 중입니다..